马鞍山附近想过夜电话联系

Hello, welcome to visit the great wall construction machinery concrete mixing station equipment price network!

Online consultation | About us | contact us | Website map
Hotline: 0371-65861528


Current location: home page > News Center > What's new >

What are the operation rules of JZC series concrete mixer

Author: admin Release time: August 25, 2017 Number of visits:

JZC series concrete mixer operating procedures:
1. The installation of concrete mixer should be stable and firm, the walking wheel should be suspended, and the base should be higher than the ground. Anti smashing and rainproof sheds shall be set up near buildings.
2. Before operation, the electric leakage protection device is complete and reliable.
3. When operating, start the machine first. After the operation is normal, add materials and water for mixing. It is not allowed to add enough material before starting again. Sand should be sieved and excessive feeding is strictly prohibited.
4. When feeding, the tool should be higher than the mixing blade. It is strictly forbidden to put the tool into the mixing drum to pick up materials during operation.
5. When large sundries fall into the mixing drum, the machine must be shut down and checked again. It is strictly forbidden to reach out for fishing during operation.
6. It is strictly forbidden to maintain the machine during operation. If it is stuck or abnormal, the machine should be shut down and power off before troubleshooting.
7. After the operation, the power supply must be cut off, the power plug (PIN) must be removed, and the inside and outside of the mortar mixer should be cleaned with water (no water entering into the electrical equipment is allowed during cleaning).