马鞍山附近想过夜电话联系

Hello, welcome to visit the great wall construction machinery concrete mixing station equipment price network!

Online consultation | About us | contact us | Website map
Hotline: 0371-65861528


Current location: home page > News Center > Special report >

How to use cement silo for longer service life

Author: admin Release time: October 16, 2017 Number of visits:

As we all know, the cement silo is composed of dust removal equipment at the upper part (to prevent dust leakage), the arch breaking device at the lower part (to prevent the powder from agglomerating and make the powder discharge smoothly), and the material level sensing equipment (which can grasp the use of materials in the bin at any time). It also includes: the steel structure of the silo, ladder, guardrail, feeding pipe, pressure safety valve, discharge valve, etc. Therefore, if you want to make the cement silo more durable for you, you should not only ensure that the steel structure of the silo is not damaged, but more importantly, you should ensure that the various components of the cement silo can be used for you in good condition. It's not to say that you don't use it often, and it doesn't meet your wishes when you buy it. This requires you to know how to do a good job in the maintenance of cement silo. But the premise of good maintenance is that you should know how to use each device correctly.
The correct use of dust removal equipment is very important, because it is related to the capacity of cement silo, discharge rate and other important issues. Although the dust of the main machine is not located in the bottom of the dust collector due to the dust collecting pipe of the main machine, the dust can not be settled in the bottom of the dust collector due to the dust collecting pipe of the main machine, The solution is to install a butterfly valve at the bottom of the dust collecting hopper, which is closed when the dust collector is working, and all the induced air pipes are connected to the flange on the side of the dust hopper to provide settling space for the dust blown down by pulse and avoid secondary pollution of the filter element. According to the actual situation, open the butterfly valve regularly every shift or 4-5 hours to clean up the collected dust. A pneumatic butterfly valve automatically controlled by the software operation system of the concrete station can also be installed, which can be opened regularly to facilitate the normal discharge of dust. Needless to say, the structure of cement silo is relatively effective and simple
Paint it and pay attention to the ventilation between the chambers. The arch breaking device is very necessary, because the dust in the cement silo will solidify for various reasons after being used for a long time. At this time, the arch breaking device is needed. How to use it correctly? It is necessary to regularly check whether the pipeline and connection of arch breaking device are loose or air leakage; whether the starting element of arch breaking device in cement tank is flexible and normal operation; whether the structure of arch breaking device in cement tank is damaged; whether the hanging and supporting device welding points of arch breaking device are firm; whether the bolts are loose; and whether the arch breaking device is installed The piston should be removed and cleaned frequently; the arch breaking device should be kept clean without too much dust; the circuit of the arch breaking device should be checked frequently, and if any problem is found, it should be solved in time. Material level sensor equipment used for a long time will also appear material level inaccurate phenomenon, so a long time to often check the level meter, in order to better work. Climbing ladder, guardrail, outrigger, etc. are mainly to check whether there is bending phenomenon regularly, and repair them in time, so as to cause unnecessary loss. If you can do these points well, I believe your cement bin will be more durable for you!