马鞍山附近想过夜电话联系

Hello, welcome to visit the great wall construction machinery concrete mixing station equipment price network!

Online consultation | About us | contact us | Website map
Hotline: 0371-65861528


Current location: home page > News Center > Technical articles >

How to maintain oil mist device of concrete mixing plant

Author: admin Release time: September 22, 2017 Number of visits:

The function of the oil atomizer in the concrete mixing plant is to make the lubricating oil injected into the air flow after atomization, and enter the parts needing lubrication along with the air. Therefore, the lubricating oil in the oil atomizer must be kept at the normal position, neither too much nor too little.
Check the oil level between the oil cup and the bottom of the oil cup before running. 1.
2. Precautions for adding lubricating oil
① When we add oil to the concrete mixing plant equipment, we should carry out without pressure. Before operation, we should clean up the surrounding dust and other sundries to avoid entering the oil atomizer.
② The lubricating oil in the atomizer of concrete mixing plant is ordinary diesel engine oil, and the lubricating oil with viscosity of 2.5-7 degrees or industrial 40 oil can be used. The oil in the oil storage cup should be replaced in time. The capacity of the oil storage cup is calculated as 100ml, and it is suitable to use it for 100 hours.
3. Maintenance When the air filter element enters into the air filter station, it will lead to the air channeling of the air filter element, which will cause the air leakage of the air cylinder, which will cause the air leakage of the air cylinder The phenomenon is that the gap between cylinder wall and piston ring is too large, the contaminated lubricating oil will enter the compression chamber and form oil mist, thus polluting the compressed air.